Preparing the collection…
Great on mobile. Even better on desktop.
Practical PC and desk accessories. Find your fit, explore the details, and shop finished products on Etsy.
01 / 05Twelve designs · 6 made to order
More air where compact cases have little room for it. The EliteDesk sleeve adds five fan seats to HP’s 800 Mini, each one an intake or an exhaust; the five PCIe mounts set a 40, 60 or 120 mm fan in the expansion slots right beside your graphics card. Fans sold separately.
Compare two designs. Renders are framed individually, not shown at a common scale. Fans are not included.
| Design | Fans | Free slots | Case fit |
|---|---|---|---|
| Low-profile 40 mm | 1 × 40 mm | 2 | Low-profile supported |
| Dual 40 mm | 2 × 40 mm | 2 | Check case profile |
| Low-profile 60 mm | 1 × 60 mm | 3 | Low-profile supported |
| High-profile 60 mm | 1 × 60 mm | 3 | High-profile bracket |
| 120 mm | 1 × 120 mm | 1 mounting position | Allow space for the entire fan |
Fans are not included. Slot count describes the mounting footprint, not the full internal clearance. Check fan thickness, the mount and nearby components against the listing dimensions.
Five fan mounts · Slide-on sleeve · Coming soon to Etsy
Drastically improve airflow through a compact mini PC with five fan mounts, in the layout that suits your setup. CPU peak −9.0°C vs. our legacy mount; NVMe drive −19.0°C and chipset −13.0°C vs. stock. Perforated lid only. Fans sold separately.
Two 40 mm fans · Two slots
Direct airflow beneath your GPU with two compact fans working side by side. Fans sold separately.
One 60 mm fan · Three slots
Bring targeted airflow to a cramped GPU area without needing a full-height case. Fans sold separately.
One 60 mm fan · Three slots
Help clear pockets of warm air beneath your GPU with a dedicated 60 mm fan. Fans sold separately.
One 40 mm fan · Two slots
Help move trapped warm air from beneath your GPU, even in a low-profile case. Fans sold separately.
One 120 mm fan · Single-slot bracket
Bring a larger fan’s airflow directly to the space beneath your GPU. Fans sold separately.
120 mm fan · 40.8 mm tall
The NAS in Dean’s server rack turns its CPU 90 degrees, so the air cooler blows upward, with only about 45 mm of room above it. Made for Dean Pesiri, Jan 2026.
Five 60 mm fans · Rack top vent
Dean’s rack has a cutout on top, 32 cm wide and 5 cm tall, with screw holes 33 cm apart. Made for Dean Pesiri, Jan 2026.
Two 60 mm fans · 140 mm mount
Dorian wanted to cool the hard drives at the bottom of his case: two Noctua NF-A6x25 PWM fans side by side, screwed onto a 140 mm fan mount, no taller than 8 cm, on a thin plate that takes the fans’ eight anti-vibration mounts. Made for Dorian, Jul 2026.
Two 40 mm fans · HBA card
Scott needed air blowing straight up onto the heatsink of an HBA card, in the same orientation as our 120 mm PCIe mount but with Noctua NF-A4x20 fans. Made for Scott, Feb 2026.
One 60 mm fan · Jonsbo N4
A 60 mm fan mount for the Jonsbo N4, for better airflow through the drives. Made for Brian, Apr 2026.
Two 92 mm fans · Jonsbo N4
Brian came back after his first order for a second Jonsbo N4 part: a thin plate that sits in the case’s front panel and holds two 92 mm fans. Made for Brian, May 2026.
02 / 05Six designs · 2 made to order
Parts that live inside the case. Two adjustable supports help hold a heavy graphics card up against sag, and AIO combs and clips line up loose radiator tubing, plain or with a brand logo.
75–110 mm · Four finishes
Keep your graphics card level, with a finish that belongs in your build.
Two adjustable sizes
Support a heavy graphics card before sag becomes part of your build.
Nine styles · Tube management
Keep wandering AIO tubes neatly aligned.
Two body colors · Red logo
Bring loose AIO tubing into line with a coordinated ASUS finish.
Six combs in three sizes · 16 mm tubing
Christian already had our tube combs and asked for six to fit the thicker tubes of his ZOTAC Gaming RTX 5090 AIO, in translucent grey, with the ZOTAC Gaming claw mark on each clip. Made for Christian, Jun 2026.
Three combs · 21 mm tubing
Rob asked for three translucent tube combs with the ROG logo, sized for 21 mm tubing. Made for Rob Holland, Feb 2026.
03 / 05Six designs
A place for the things you reach for. Hang headphones from a Corsair 5000D case or the desk edge, stand a DualSense upright, charge an Apple Watch on an angled dock, and keep your phone propped up or in hand.
Case-mounted · Three views
Get headphones off your desk and onto your Corsair 5000D or 5000X.
Low-profile display · Two views
Give your controller a place to rest without taking over your desk.
Angled charging dock · Three views
A dedicated place for your Apple Watch: an angled charging-puck recess, a concealed cable channel and a removable cable cover keep the setup tidy.
Desk clamp · Interactive installation · Currently unavailable
Free up desk space while keeping your headphones within reach.
Three-finger grip · Built-in stand
Take the phone’s weight off your pinky, with a stand ready when you set it down.
Angled desktop cradle · Two views
Hold your phone upright at an ergonomic viewing angle with rear cable pass-through.
04 / 05Three designs
Small enough to take with you. A magnetic slider and a clicky Gateron Blue keychain for restless fingers, and a two-piece mount that hides an AirTag or FineTrack beneath your bottle cage.
Three sizes · Magnetic snap
A pocket-sized tactile break. Slide the puck; feel it snap into place.
1, 2 or 3 keys · Gateron Blue
Take the keyboard click with you. A pocket-sized mechanical break for restless fingers.
AirTag & FineTrack · Bottle-cage mounting
Give your tracker a discreet home beneath your bottle cage.
05 / 05Eight designs
Parts that did not exist until someone asked. Each one started as an Etsy message with a problem, measurements and photos of the build, and shipped as a part made for that build alone: eight pieces for six customers, three of whom came back for a second. Every one was delivered exactly as asked.
Six combs in three sizes · 16 mm tubing
Christian already had our tube combs and asked for six to fit the thicker tubes of his ZOTAC Gaming RTX 5090 AIO, in translucent grey, with the ZOTAC Gaming claw mark on each clip. Made for Christian, Jun 2026.
120 mm fan · 40.8 mm tall
The NAS in Dean’s server rack turns its CPU 90 degrees, so the air cooler blows upward, with only about 45 mm of room above it. Made for Dean Pesiri, Jan 2026.
Two 60 mm fans · 140 mm mount
Dorian wanted to cool the hard drives at the bottom of his case: two Noctua NF-A6x25 PWM fans side by side, screwed onto a 140 mm fan mount, no taller than 8 cm, on a thin plate that takes the fans’ eight anti-vibration mounts. Made for Dorian, Jul 2026.
Five 60 mm fans · Rack top vent
Dean’s rack has a cutout on top, 32 cm wide and 5 cm tall, with screw holes 33 cm apart. Made for Dean Pesiri, Jan 2026.
Two 40 mm fans · HBA card
Scott needed air blowing straight up onto the heatsink of an HBA card, in the same orientation as our 120 mm PCIe mount but with Noctua NF-A4x20 fans. Made for Scott, Feb 2026.
Three combs · 21 mm tubing
Rob asked for three translucent tube combs with the ROG logo, sized for 21 mm tubing. Made for Rob Holland, Feb 2026.
One 60 mm fan · Jonsbo N4
A 60 mm fan mount for the Jonsbo N4, for better airflow through the drives. Made for Brian, Apr 2026.
Two 92 mm fans · Jonsbo N4
Brian came back after his first order for a second Jonsbo N4 part: a thin plate that sits in the case’s front panel and holds two 92 mm fans. Made for Brian, May 2026.
Customer photosVerified Etsy buyers
Our parts in other people’s machines and bags, photographed by the people who bought them, in their own words.
Just what cable management doctor ordered!! They fit nice and snug on my corsair AIO tubes and look like they were part of the system! Definitely recommend!!
Great 3d print quality and very durable, installation was easy and quick and definitely helped with airflow to my gpu
I bought a set on amazon that was just awful (not from this seller) from a mass produced seller.. This was just what I needed sturdy, heavy duty but easy to use.. I work and travel every week to most of my communication is on my phone which has caused so much that pain in my hands started to become and issue and this is helping already!
The design and quality of the product are excellent. I considered several options, but the additional ventilation holes ultimately influenced my decision. The product fits perfectly, with no issues whatsoever. It has resolved the heat pocket problem between a 4-slot M.2 card and a secondary ITX PC located at the bottom of my case. I used the TL-B6B fan by Thermalright.
Perfect fit and very high quality 3D print for a nice snug fit.
Well made, fans fit perfectly, the seller was very friendly and helpful.
These cable combs arrived on time, and were well packaged. They look beautiful after the simple installation. I highly recommend this inexpensive upgrade for anyone who wants to make their system look more distinct and high-end.
Very cool thing. It worked perfectly
Last chapterNew York
Manufactured in small batches.
Original Bankasi designs by Marwan Ibrahim sit alongside credited designs from other makers. Our products are manufactured here, in our New York workshop.
Inside the workshop
