8 designs · 40 to 140 mm
PC Fan Grill
In stockA slim fan grill in eight symmetric geometric patterns: honeycomb, hex target, louvre slots, staggered slots, square grid, diamond grid, triangles and radial rings. Every pattern comes in every size, from 40 to 140 mm.
Available for 40, 60, 80, 92, 120 and 140 mm fans, 3 mm thick, with screw holes on standard fan spacing. Mounts with your fan’s own screws, which are not included. Sold in packs; every grill in a pack is the same design, size and color. See Etsy for available colors.
Manufactured from premium PETG-HF for thermal resistance and structural durability.
Why it’s designed this way
Cover a fan’s open face to keep fingers and cables out of the blades.
Before you order
- Your fan’s size: 40, 60, 80, 92, 120 or 140 mm
Setup & use
Step 1Line it up
Hold the grill against the fan’s open face with its holes over the fan’s corner holes.
Step 2Screw it on
Fasten it with the fan’s screws, through the grill and the fan into the case or mount.
Drawn from the product’s 3D models. Cases, desks, devices and other surroundings are illustrative; drawings are not measured plans.
Care & troubleshooting
Wipe the grill clean with a dry cloth or a soft brush.
