Full frame · Screw or tape
Nvidia Shield TV Pro Wall Mount Frame
In stockA full frame that holds a Shield TV Pro flat against the wall or behind a TV. The Shield sits inside, the cables plug in from the open side, and the frame screws on or sticks on with mounting tape.
About 166 x 112 x 41 mm. Four countersunk screw holes keep the screw heads flush under the Shield. Prefer something smaller? See the Shield TV Pro Wall Mount, a slim ledge. Screws, anchors and tape are not included. See Etsy for available colors.
Manufactured from premium PETG-HF for thermal resistance and structural durability.
Why it’s designed this way
Hold the Shield TV Pro flat on the wall or behind the TV, fully framed.
Before you order
- Four screws with wall anchors for drywall, or 3M mounting tape
Setup & use
Step 1Mark the holes
Hold the frame level on the wall, open side up, and mark the four screw holes.
Step 2Fix it to the wall
Screw it on through the countersunk holes, or stick the flat back on with mounting tape.
Step 3Slide the Shield in
Slide the Shield into the frame and plug in its cables from the open side.
Drawn from the product’s 3D models. Cases, desks, devices and other surroundings are illustrative; drawings are not measured plans.
Care & troubleshooting
Check the wall type and use suitable anchors. Keep the frame away from heat sources.
