92 mm PCI Bracket Fan Mount

In stock

Hold a 92 mm fan right over your expansion cards. The mount screws onto your case’s PCI slot rail with the slot screws, so the slots stay free and cards still install behind it. Fans are not included.

View listing on Etsy

Ask about this design

4-step setup guide

Fits standard 92 × 92 × 25 mm fans (82.5 mm hole spacing), fastened with the screws that came with the fan. Uses 5 of your case’s PCI slot screws and spans about 5 slot positions. No drilling. Fan and screws are not included. See the Etsy listing for colours. Preview airflow is illustrative.

Manufactured from premium PETG-HF for thermal resistance and structural durability.

Why it’s designed this way

Give your expansion cards direct airflow from a full-size fan, without giving up a slot.

Before you order

A run of 5 PCI slot screws on your case’s slot rail; the mount spans about 5 slot positions.
A standard 92 × 92 × 25 mm fan and the screws that came with it. Not included.
Room in front of your expansion cards for the fan.

Setup & use

Step 1
Fit your fan
Screw your fan to the mount with the screws that came with the fan.
Step 2
Fasten it to the slot rail
Take out your case's PCI slot screws, line the mount up with the slot rail and fasten it with the same screws.
Step 3
Keep your cards in place
Install or keep your expansion cards in the slots behind it as usual.
Step 4
Connect the fan
Connect the fan to a fan header.

Drawn from the product’s 3D models. Cases, desks, devices and other surroundings are illustrative; drawings are not measured plans.

Care & troubleshooting

If the mount loosens, retighten the slot screws. Clear dust from the fan and the cards now and then.

Open this guide in Help

From the Workbench

All stories

This design beside another PCIe fan mount. Renders are framed individually, not shown at a common scale. Fans are not included.