Lian Li A3 120 mm Fan Spacer: Spacer
View

Pair · Slides onto the fan rails

Lian Li A3 120 mm Fan Spacer

In stock

Close the gap between your 120 mm fans and the mesh panel of a Lian Li A3-mATX. Each spacer slides onto the case’s fan rails over a fan, so the fan sits sealed against the mesh with no gap around it.

View listing on Etsy
Ask about this design

Made for the Lian Li A3-mATX. Sold as a pair, one per 120 mm fan. Slotted friction fit with no screws, and it never touches the fans. Fans are not included; they are shown for fit and scale. See Etsy for available colors.

Manufactured from premium PETG-HF for thermal resistance and structural durability.

Why it’s designed this way

Close the gap between your 120 mm fans and the A3’s mesh panel.

Before you order

  • A Lian Li A3-mATX with 120 mm fans on its fan rails
  • One spacer per fan

Setup & use

  1. The A3’s side mesh panel lifted off, showing two 120 mm fans on the side fan rails.
    Step 1

    Take off the mesh panel

    Take off the mesh panel so you can reach the fan rails.

  2. A spacer sliding along the fan rails over a 120 mm fan, its slotted side on the rails.
    Step 2

    Slide a spacer over each fan

    Slide a spacer onto the rails over each fan until it sits snug, slotted side on the rails.

  3. The mesh panel going back on over the two spacers.
    Step 3

    Refit the mesh panel

    Refit the mesh panel so it presses against the spacers.

Drawn from the product’s 3D models. Cases, desks, devices and other surroundings are illustrative; drawings are not measured plans.

Care & troubleshooting

If a spacer shifts, slide it back over its fan. Dust the mesh now and then.

Open this guide in Help

From the Workbench

All stories