Set of 4 · Cut to length
Jumper Wire Organizer
In stockKeep breadboard jumper wires in their own lanes. Snap standard jumper wires into the strip’s 36 slots, and cut it between any two slots to the length you need.
Each strip is about 143 mm long with slots about 4 mm apart, for standard jumper wires with 1.4 mm insulation. Sold as a set of 4. Wires, breadboard and cutters are not included; they are shown for fit and scale. See Etsy for available colors.
Manufactured from premium PETG-HF for thermal resistance and structural durability.
Why it’s designed this way
Keep the wires on your breadboard neat and easy to follow.
Before you order
- Standard jumper wires with 1.4 mm insulation
- Flush cutters, if you want shorter pieces
Setup & use
Step 1Cut it to length
Cut a strip between two slots to the length you need, or use it whole.
Step 2Snap the wires in
Lay it across your wires near the breadboard and snap each wire into its own slot.
Step 3Add a second strip
Add a second strip further along to keep long runs together.
Drawn from the product’s 3D models. Cases, desks, devices and other surroundings are illustrative; drawings are not measured plans.
Care & troubleshooting
Snap wires out by hand; do not pull them out by the connector.
